-40%
Hydraulic Gear Motor or Pump 26 cc/rev (1.58 in3/rev) 4-17gpm 30HP bi-direction
Hydraulic Gear Motor or Pump 26 cc/rev (1.58 in3/rev) 4-17gpm 30HP bi-direction
Hydraulic Gear Motor or Pump 26 cc/rev (1.58 in3/rev) 4-17gpm 30HP bi-direction
Hydraulic Gear Motor or Pump 26 cc/rev (1.58 in3/rev) 4-17gpm 30HP bi-direction
Hydraulic Gear Motor or Pump 26 cc/rev (1.58 in3/rev) 4-17gpm 30HP bi-direction
Hydraulic Gear Motor or Pump 26 cc/rev (1.58 in3/rev) 4-17gpm 30HP bi-direction
Hydraulic Gear Motor or Pump 26 cc/rev (1.58 in3/rev) 4-17gpm 30HP bi-direction
Hydraulic Gear Motor or Pump 26 cc/rev (1.58 in3/rev) 4-17gpm 30HP bi-direction
Hydraulic Gear Motor or Pump 26 cc/rev (1.58 in3/rev) 4-17gpm 30HP bi-direction

Hydraulic Gear Motor or Pump 26 cc/rev (1.58 in3/rev) 4-17gpm 30HP bi-direction

$ 94.51

Availability: 33 in stock
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money back or replacement (buyer's choice)
  • MPN: MFEG26-K0.6-2A-O12O12S-B-1
  • Maximum Continuous Flow Rate: 19.5 gpm
  • Inlet Port Diameter: SAE -12, 1 1/16-12, O-ring Boss
  • Maximum Intermittent Pressure: 2900psi
  • Return shipping will be paid by: Buyer
  • Maximum Continuous Pressure: 2619psi
  • Maximum Intermittent Torque: 732 in-lbs
  • Rated Power: 29.9 hp
  • Mounting Type: Flange Mounted
  • Shaft Length: 1 inch
  • Condition: New
  • Torque at Maximum Pressure: 661 in-lbs
  • Brand: Fluidhaus
  • Shaft Diameter: 5/8 inch
  • RPM at Maximum Torque: 2619
  • Item must be returned within: 14 Days
  • Maximum Continuous Torque: 661 in-lbs.
  • Outlet Port Diameter: SAE -12, 1 1/16-12, O-ring Boss

    Description

    Operational as a fixed displacement gear pump or motor. The shaft can also be rotated clockwise or counterclockwise. Proven high quality robust design successfully designed into many high volume applications.
    Fluidhaus Part No.: MFEG26-K0.6-2A-O12O12S-B-1
    * 26cc/rev. (1.587 in^3/rev.)
    * Power: 30hp, 641 in-lbs. continuous torque, 696 in-lbs. peak torque
    * 17.1 gpm maximum at 2500rpm, 12.3gpm at 1800rpm, 4.1gpm at minimum 600rpm
    * SAE A, 2 bolt mounting flange
    * 2537 psi continuous pressure, 2755 psi
    * Keyed shaft 5/8" diameter
    * SAE -12, 1 1/16-12 UNF 2B, O-ring boss hydraulic port connections
    * Side Ported
    * Minimum smooth rotational speed = 600 rpm
    * Maximum rotational speed = 2500 rpm
    * 72.5 psi maximum low-pressure side (outlet). Exceeding this could create excessive pressure in the housing and leakage from the shaft seal. Make sure there are minimal restrictions when connecting to the reservoir.
    * This motor comes with a built-in shuttle check valve that automatically sends leakage oil to low pressure side. No need for a separate drain line.
    Cost effect method as a pump or motor for high power rotational motion to drive fans, conveyors, power equipment in construction, agricultural, industrial, and commercial applications. Use with speed reducing gear boxes for winches, wheel drives or any other slower rotational motion needed.
    link to catalog: Catalog (https://drive.google.com/open?id=1RvKn37nZ5sIeR9nDpf-ibFfCwaEGTcxK)
    High volume series production available per request.
    Helpful calculations:
    Pump flow in gpm = in^3/rev x rpm ÷ 231 [example: 1.587in^3/rev x 1800rpm ÷ 231 = 12.3gpm]
    Power to drive pump or motor in HP = gpm x psi ÷ 1714 ÷ .85 [example: 12.3gpm x 3000psi ÷ 1714 ÷ .85 = 25.3HP]
    Motor rpm from pump input flow gpm = gpm x 231 ÷ in^3/rev [example: 12.3gpm x 231 ÷ 1.587in^3/rev = 1790 rpm]